Telephone: +44 (0) 1747 820 111 |  Fax: +44 (0) 1747 820 127

Peripherals

bl-819-bluetooth-1xrs232-male-dte-class-2

Compact, Award winning Brainboxes RS232 Adaptor (male connector) allows any device with an RS232 port to communicate with another Bluetooth device without the need for any additional software. Ideal for Bluetooth enabling dumb RS232 devices such as dataloggers etc. with option to power from Pin 9. Based on fully tested Bluetooth silicon, allowing communications at the full Bluetooth data rates. No visible antenna.

bl-830-bluetooth-1xrs232-female-dte-class-2

Compact, Award winning Brainboxes RS232 Adaptor (male connector) allows any device with an RS232 port to communicate with another Bluetooth device without the need for any additional software. Ideal for Bluetooth enabling dumb RS232 devices such as dataloggers etc. with option to power from Pin 9. Based on fully tested Bluetooth silicon, allowing communications at the full Bluetooth data rates. No visible antenna.

bl-875-bluetooth-2xrs232-paired-devices
Compact, Award winning Brainboxes Pre-paired RS232 adaptors for cable replacement without the need for any additional software. Ideal for Bluetooth enabling dumb RS232 devices such as dataloggers etc. With option to power from Pin 9. Based on fully tested Bluetooth silicon, Allowing communications at the full Bluetooth data rates. No visible antenna.
cc-525-pci-2xrs422-485-18mbaud

This PCI card can run at an amazing speed of up to 18,000,000 baud. It provides 2 industry standard RS422/485 serial ports for PC compatibles in a single PCI slot. The card has on-board zener diodes giving transient spike protection to the inputs - making it ideal for factory automation installations. Stunning ULTRA 15 or 18 megabaud data transfer rates!! And 128 byte deep FIFO guarantees uncompromising performance and faultfree use.

cc-530-pci-2xrs422-485-15mbaud

This PCI card can run at an amazing speed of up to 18,000,000 baud. It provides 2 industry standard RS422/485 serial ports for PC compatibles in a single PCI slot. The card has on-board zener diodes giving transient spike protection to the inputs - making it ideal for factory automation installations. Stunning ULTRA 15 or 18 megabaud data transfer rates!! And 128 byte deep FIFO guarantees uncompromising performance and faultfree use.

clean-room-dock

Xplore's Clean Room Dock has been designed for the specialized needs of "clean room" environments - pharmaceutical and PC component manufacturers, laboratories and research facilities. It works with Xplore's iX104C5 Clean Room Tablet PC and offers a number of unique features.

Ethernet to DIO device: 8 non-isolated digital input channels and 8 digital output channels. Built in 2 port Ethernet switch – ideal for daisy chain topology. Outputs each group of 4 lines has its own common rail. Powerful ARM 50 MHz, 32 Bit CPU. Offers robust and intelligent “control side” devices that provide the interface to systems on the 24V factory floor environment, commonly referred to as “process side”. The ED product range is designed for harsh environments. The digital output port line are implemented as protected output circuits, providing current overload and short circuit protection, voltage surge, overload and open circuit protection and over temperature protection to allow the widest possible usage and range of devices. The outputs are good for driving hot and cold resistive loads, capacitive loads and inductive loads and are especially suited for loads with high inrush currents such as cold bulbs/lamps and motors. Typical applications are control and switching of AC and DC motors, Fans, relay drivers, pumps, Voltage Regulators and Battery Chargers, LEDs and Bulbs, Air Conditioning, Heaters and Solenoids.

es-020-ethernet-to-serial-device-server
Ethernet 1 Port RS232 10xScrew Terminals Blocks perfect for industrial applications. Data transfer rates up to 1,000,000 baud, coupled with 1Mbit/s line drivers deliver uncompromising performance. Our ES range provides simple instant networked serial ports. A web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser. For Windows our in-house designed (32 bit and 64 bit) driver gives you local COM ports, retaining existing software applications and allowing you to connect across your network to remote devices just as if they were attached locally. You can access the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone. Serial Port Tunneling (individually configurable) allows serial cable replacement over any distance, no software required. On Windows OS TCP/IP sockets are handled by the Winsock API, this will differ on other OSs. Suitable to be wired into existing power and network infrastructure or can be used with our PW-600 power supply.