RM-201G Rackmount Industrial Server

- lntel^® Core™ 2 Duo, 3.0 GHz,
1333 FSB, 6MB Cache

1 x Power Button
1 x Reset Button
1 x Power LED
1 x Fault LED
8 x HDD LED (4 x Power & 4 x Activity)
2 x USB

- 1 x PCI 32 bit
- 1 x PCI-E x 4

2U Chassis

432mm (W) x 44mm (H) x 711mm (D)

4 x Hot-swap

- 4 x 240-pin DDR2 sockets support up to 8GB
- Supports 256MB, 512MB,
1GB, 2GB DIMM

Phoenix BIOS^® on 8Mbit Flash
ROM

500W PSU
- 105 ~ 264 VAC Full Range
- 12V Max. Current: 32A

- Fans
- Power Supply
- HDDs
- Intrusion Detection
- Temperature

One LGA775-pin Socket support Intel^® CPUs of the type below:
- Intel^® Core^TM 2 Duo/ Wolfdale / Yorksfield quad core processors.
- Supports 800/1066/1333 MT/s

- Four 240-pin DDR2 sockets support up to 8GB
- Dual channel memory bus (must be populated in pairs)
- Un-buffered, nonECC DDR2 677/800MHz DIMM
- Supports 256MB, 512MB, 1GB, 2GB DIMM

- Intel^® Q35 Memory Controller Hub(GMCH)
- Intel^® 82801IR I/O Controller Hub (ICH9R)
- Winbond W83627DHG super I/O

- One Intel^® 82573L and One Intel 82573V single port Gigabit Controllers

- Integrated graphics from Q35 (1) PCI-E x16 slot is available for the VGA card

- Onboard Realtek ALC262
- 2 x 5 pin header

- (1) PCI-E x16 slot
- M2061 Riser card : PCI-E x8 to PCI-X
- M2083 Riser card : PCI-E to PCI-E
- (1) PCI-E x 8 slot with PCI-E x4 link only
- (4) PCI slots

Integrated SATA Controller

- (6) SATA ports from ICH9R

Integrated I/O

(1) 40-pin IDE connector
(1) 34-pin Floppy connector
(6) SATA connectors
(4) pin headers for USB ports (each header supports two USB 2.0 devices) (1) pin header for front panel audio ports
(1) Tyan SMDC connector for server management (M3295-2) (1) pin header for SMBUS connection
(1) chassis LCD module interface connector (alternative of serial port header)

- PS/2 connector
- Stacked Two USB ports
- Stacked COM port and VGA connector
- Stacked Two USB port & (1) 10/100M LAN port
- Two RJ45 10/100/1000M connectors
- Audio connectors (Line-in/Line-Out/Mic-In)

System Management

- Total 6 fan headers with control and tachometer monitoring
- Monitors voltage for CPU, Memory & Power Supply
- Monitoring temperature for CPU & environment
- One pin header for Chassis Intrusion detection
- Supports Serial Console Redirect
- Supports Watch Dog Timer, S3

- Phoenix BIOS^® on 8Mbit Flash ROM
- Supports ACPI 2.0
- Supports boot from USB device
- Power-on mode control for AC power loss recovery

- ATX form factor 12"X9.6"(305X244mm)