- 1 port RS232
- Max baud rate 1,000,000 (1 MegaBaud)
- 10/100Base TX Ethernet port
- User friendly interface, simple to use, powerful in operation
- Web configuration and RFC2217 compliant interface for non-Windows
- IP-30 rated enclosure
- LED status indication
- Optional DIN rail mounting kit
- Serial Port Tunneling (individually configurable) allows serial cable
- replacement over any distance, no software required
- Simple operation for each and every operating system
Ethernet 1 Port RS232 10xScrew Terminals Blocks perfect for industrial applications. Data transfer rates up to 1,000,000 baud, coupled with 1Mbit/s line drivers deliver uncompromising performance. Our ES range provides simple instant networked serial ports. A web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser. For Windows our in-house designed (32 bit and 64 bit) driver gives you local COM ports, retaining existing software applications and allowing you to connect across your network to remote devices just as if they were attached locally. You can access the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone. Serial Port Tunneling (individually configurable) allows serial cable replacement over any distance, no software required. On Windows OS TCP/IP sockets are handled by the Winsock API, this will differ on other OSs. Suitable to be wired into existing power and network infrastructure or can be used with our PW-600 power supply .
Windows Users - Our software drivers gives you local COM ports, allowing you to retain your existing software applications and connect to your devices over the network. COM Port can be assigned from COM1 to COM255 and the Brainboxes Ethernet to serial device remembers your COM Port assignment on reboots.
Web Interface Users (Linux/Apple OS/Android) - Alternatively access the device via TCP/IP socket from any networked device. Configure options
via web interface.
|Status LED||Green||Device Ready|
|Flashing Yellow||Changing Settings|
|Flashing between Red & Green||Querying IP|
|Flashing Green/Red||User performing Hard Reset|
|Flashing between Green & Red/Yellow||IP address diagnostic|
|Flashing between Green & Yellow||Initialization diagnostic|
|Serial Port LEDs||Green light on||Port Open|
|Flashing Green||Data RX / TX|
|Network LED||Green light on||Link Established|
|Flashing Green||Data RX / TX|
|Ports||1 port RS232|
|Connector||Screw terminal block connector - 0.1 inch pitch|
|Power Input||5 - 30V DC input, reverse polarity protected|
Port Settings - RS232
|Baud Rate||From 110 - 1,000,000 (1 MegaBaud)|
|Data Bits||5,6,7 or 8|
|Parity||Odd, Even, None, Mark or Space|
|Stop Bits||1 or 2|
|Flow Control||RTS/CTS, DSR/DTR, XON/XOFF|
|Tx/Rx Modes||Point to Point|
Standards Available with
• ES-020 : RS232
|RS232 Standard: RS232 allows point to point communication between 2 devices.
RS422 Standard: RS422 allows one transmitter and up to 10 receivers with data transmitter rates up to 10
megabits per second for distances up to 40 feet and up to 100 Kilobits per second for distances up to 4,000
feet (1219 metres).
To achieve good long distance noise immunity, 2 wires are used to carry each signal, configured as a twisted
pair of cables. The TXD pair and RXD pair are used to carry the data whilst the RTS pair and CTS pair lines are
used for handshaking. Thus 2 twisted pairs are used without handshaking and 4 twisted pair cable is used with
handshaking both these schemes allow full duplex data communications.
RS485 Standard: RS485, based on the RS422 standard allows up to 32 driver/receivers pairs on a standard
load or 128 low load devices per port can be connected. Whilst only one of these should be transmitting data
at any time, the rest can all simultaneously listen to the data. Handshaking is performed by software protocol.
Two twisted pairs form a full duplex system.
Often only one twisted pair cable is used as the TXD and RXD lines are tied together; this is known as
half duplex mode. Brainboxes RS422/485 products implement a state of the art hardware autogating circuit
ensuring error free communications in half duplex configurations.
Port Settings - Ethernet
|Data Rate||10/100 Mega bits/second|
|Cabling||Normal / Crossover auto-sensing (Auto-MDIX)|
|Operating Temperature||0 to 55oc|
|Storage Temperature||-20 to 85oc|
|Ambient Relative Humidity||5 to 95% (non-condensing)|
|Housing||IP-30 rated case|
|Network Protocols||ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, HTTP, RFC2217|
|Configuration Options||Windows Utility, Web Interface|
|OS Compatibility||Microsoft Windows 7 32 bit & 64 bit Editions / Windows Server 2008 32 bit & 64 bit Editions / Windows
Server 2008 & Windows 2000 / Windows Vista 32 bit & 64 bit Editions / Windows XP 32 bit & 64 bit
Editions / Microsoft Windows 2000 /Fully RFC2217 compliant / Interface for other OS’s & Linux
|Connection to Network||Ethernet 10BaseT / 100BaseTX|
|Industry Approvals||AEO C-TPAT Microsoft Certified Gold Partner
RoHS EMC: CE TAA
|Microsoft Approvals||Microsoft Certified Gold Partner|
|Microsoft Signed Drivers||Windows 7 32 bit & 64 bit Editions
Windows Vista 32 bit & 64 bit editions
Windows XP 32 bit & 64 bit editions