Features
- DC input 12V (9.5V ~ 16V)
- Input and output isolation
- Soft start function, low inrush current
- Input under and over voltage protection
- Over load, over voltage & short circuit protection
- Power good signal / PS-ON signal
- +3.3V & +5V output remote sensing
- Built-in long life ball bearing fan
- 100% 50°C burn-in test
- Meet Intel ATX 2.01 / ATX2.03
- UL, cUL, TUV, CB, CE standard
- Case Details
150 x 140 x 86mm
Technical Specifications
| Input Voltage | DC 9.5V ~ 16V Typical 12V |
| Input Current | <22.5A @ 12V DC input, full load condition |
| Input protection | 30A / 125V ceramic fuse |
| Over Load Protection | Over 105% ~ 150% of rating, shutdown. Auto recovery when fault condition been removed |
| Over Voltage Protection | +5V: +5.8V~+7.0V, +12V: +13.8V~+17.5V. Shutdown. Auto recovery when fault condition been removed |
| Input Voltage Protection Shutdown | Shutdown. Auto recovery when fault condition been removed |
| Rise time | <20Ms |
| Power Good Signal | Power on within 100 ~ 500ms, high level TTL signal release |
| PS-ON Signal | TTL high = power off: TTL low = power on |
| Cooling | A 36CFM (min.) DC ball bearing Fan |
| Temperature | Operating: 0~70°C; derating: 45°C ~70°C : 2.0%/°C. Storage: -10~+75°C |
| Humidity | Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F | 173K hour |
| SAFETY | UL 1950, CSA C22.2 No. 950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 standard |
| EMI Standards | FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B |
| EMS Standards | EN 50082-1 (1997) |
DC Output Specification
| Part No | Voltage | Min. Load | Max. Load | Reg | R & N (max) | Eff (typ) | Max Power |
| SDX-160-12 | +3.3V | 0A | 15A | ±5% | 50mV | 60% | 100W |
| +5V | 3A | 20A | ±5% | 50mV | 60% | 100W | |
| +12V | 0.5A | 7A | +5/-6% | 120mV | 60% | 160W | |
| -5V | 0A | 3A | ±5% | 70mV | 60% | 160W | |
| -12V | 0A | 1.5A | +10/-8% | 150mV | 60% | 160W | |
| +5Vsb | 0A | 1.5A | ±5% | 50mV | 60% | 160W |
