| System |
Form Factor |
2U Rackmount |
| Gross Weight |
29 kg |
| Feature |
Four nodes in one chassis |
| Chassis Model |
YR292 |
| Dimension (D x W x H) |
28.74" x 17.32" x 3.44" (730 x 440 x 87.5mm) |
| Blade Dimension (D x W x H) |
28.74" x 8.46" x 1.61" (730 x 214.8 x 40.8mm) |
| Motherboard |
S5518GM2NR |
| Board Dimension |
6.3"x16.4" (160x416.6mm), per blade |
| Front Panel (per blade) |
Buttons |
(1) RST / (1) PWR / (1) ID |
| LEDs |
(1) PWR / (1) BMC / (2) LAN / (1) HDD / (1) PWR/ ID LED |
| I/O Ports |
(2) USB ports |
| External Drive Bay (per blade) |
Type / Q'ty |
2.5" Hot-Swap / (4) |
| HDD backplane support |
SAS / SATA 6.0Gb/s |
| System Cooling Configuration (per blade) |
FAN |
(3) 4cm fans |
| Processor (per blade) |
Supported CPU Series |
Intel Xeon E3-1200, i3-2100 (32nm / 22nm) series processors |
| Socket Type / Q'ty |
LGA 1155/ (1) |
| Thermal Design Power (TDP) wattage |
Max up to 95W |
| System Bus |
Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect (QPI) support |
| Chipset (per blade) |
PCH |
Intel C204 |
| Memory (per blade) |
Supported DIMM Qty |
(4) DIMM slots |
| DIMM Type / Speed |
DDR3/DDR3L 1066 / 1333 /1600 UDIMM ECC |
| Memory channel |
2 Channels per CPU |
| Memory voltage |
1.5V |
| Expansion Slots (per blade) |
PCI-E |
(1) PCI-E Low-Profile Gen.3 x16 slot |
| Note: |
use Intel Ivy Bridge CPU to support PCI-E Gen.3 |
| LAN (per blade) |
Port Q'ty |
Total (3) ports, (1) dedicated for IPMI |
| Controller |
Intel I350-AM2 |
| PHY |
BCM 5221A |
| Storage (per blade) |
SATA |
Connector |
(4) SATA |
| Controller |
Intel C204 |
| Speed |
3.0 Gb/s |
| RAID |
RAID 0/1/10/5 (Intel Matrix RAID) |
| Graphic (per blade) |
Connector type |
D-Sub 15-pin |
| Resolution |
1600x1200@60Hz |
| Chipset |
Aspeed AST2150 |
| I/O ports (per blade) |
USB |
(2) ports |
| COM |
(1) DB-9 COM port |
| VGA |
(1) D-Sub 15-pin port |
| RJ-45 |
Total (3) ports, (1) dedicated for IPMI |
| System Monitoring (per blade) |
Chipset |
Winbond W83793G |
| Temperature |
Monitors temperature for CPU & system environment |
| LED |
Fan fail LED indicator / Over temperature warning indicator |
| Others |
Chassis intrusion detection / Watchdog timer support |
| Server Management (per blade) |
Onboard Chipset |
Onboard Aspeed AST2150 |
| AST2150 IPMI Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
| AST2150 iKVM Feature |
24-bit high quality video compression / 10/100 Mb/s MAC interfaces |
| BIOS (per blade) |
Brand / ROM size |
AMI / 8MB |
| Feature |
Multiple boot options / Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| Power Supply |
Type |
ERP1U |
| Efficiency |
PFC / 80 plus gold |
| Redundancy |
1+1 |
| Input Range |
Full-range AC(100-240V) |
| Frequency |
50/60 Hertz |
| Output Watts |
800 Watts |
| |
|
|
| Regulation |
FCC (DoC) |
Class A |
| CE (DoC) |
Yes |
| Operating Environment |
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity |
90%, non-condensing at 35° C |
| RoHS |
RoHS 6/6 Compliant |
Yes |
| Package Contains |
Barebone |
(1) YR292B5518 Barebone |
| Heatsink / Cooler |
(1) LGA1155 CPU heatsinks |
| Rail kit |
(1) sliding rail kit for YR292 |
| Manual |
(1) User's manual |
| Installation CD |
(1) TYAN installation CD |
| Cable |
Power Cord |
(2) CCBL-0310, US type power cord / (2) CCBL-0300, EU type power cord |
